|
|
SiteMap
|
You are here: home->amp->A04->A.8.0.8.6.A.1
8086
Direct mechanical push pull carburetor heat control linkages should normally be adjusted so that the stop located on the diverter valve will be contacted
| | A) before the stop at the control lever is reached in the HOT position and after the stop at the control lever is reached in the COLD position. |
| | B) after the stop at the control lever is reached in both HOT and COLD positions. |
| | C) before the stop at the control lever is reached in both HOT and COLD positions. |
|
|
|
|
